BC50FL
The BC50FL motor controller is designed to control the NDW motorized E-rollers. Its primary function is to control both the speed and the direction of the motorized roller through a user friendly interface. A graphical user interface (LCD display) and straightforward buttons can be used to change the settings. Therefore, no dip switches are required. External control is possible using simple I/O control, i.e. by using a PLC.
Key features
- User friendly interface
- Stand-alone operation or simple I/O control
- Protection against induced overvoltage of motorized E-roller
- Stall protection
- Energy efficient and low start-up current
- Speed and error feedback on graphical UI
- Both PNP and NPN compatible. Configurable in the settings.
No dip switches
are required
Technical data
Rated voltage | 24Vdc |
Voltage range | 18Vdc to 26Vdc |
Current consumption (idle) | 0.1A |
Current consumption (max load) | 2A (1) |
Startup current limit | 2A (2) |
Power consumption (max load) | 50W (1) |
Number of motorized E-roller connections | 1 |
Protection rate | IP20 |
Ambient temperature in operation | 0 °C to +40 °C non-condensing |
Compatible NDW E-rollers | ER/EX-Series: 30, 50, 100, 200, 400, 800 and 1200 |
Speed and direction control | Graphical UI or via external I/O (PLC) |
Stall protection for E-roller | YES |
Overvoltage protection for E-roller | YES |
Compatibility | PNP and NPN |
Signaling | Graphical UI and Error signal (I/O) |
Dimensions | 350 x 60 x 20 mm |
Max installation height | 1000m |