24V ER 63/70/80/89 pallet E-roller
| Stat | |
| Rated voltage | 24Vdc |
| Rated current | 2A(1) |
| Starting current | 2A(1) |
| Power consumption (Max) | 50W |
| Ambient temperature in operation | 0 °C to +40 °C, non-condensing |
| Compatible NDW controllers | BC50 and BP120 |
| Motor connector type and cable length | M8-6pin, length 900mm |
| Motor shaft | Stainless steel, 11 mm hexagon, thread M12 x 1.75 |
| Tube diameter | 63.5, 70, 80, 89 mm |
| Tube material | Zinc-plated steel or stainless steel |
| Stall protection | Yes |
| Overvoltage protection | Yes |
| Protection rate | IP54 |
| Maximum Noise level | 55 dB (2) |
1. Actual current is depended on the conditions of the application, such as actual load, section length, slope etc. A very short current peak of <40ms will occur during startup of the E-roller.
2. Measured at 1 meter. Also dependent on the conditions of the application, such as conveyor frame, mounting type, load and resonance behavior of the system
